Campagnolo Record Brake Arm

Campagnolo Record Brake Arm

When I bought my De Rosa frame in the early 80’s, I built it with Campagnolo Record and Super Record components. When the new C-Record group came out, I upgraded some of the components piecemeal – cranks, Delta brakes and derailleurs. I’ve been riding the same bike all these years and time has transformed it into a “classic,” according to a guy who rode up next to me.

I had the chain off the other day for its paraffin treatment and when I turned the cranks, I heard grinding. I pulled out my Campagnolo bottom bracket wrenches, removed the bottom bracket and saw that the grease had dried out and one of the cup races and one of the axle races had been scored. Deferred maintenance isn’t good.

Rusty De Rosa fork crown

Instead of buying 20 year-old NOS bottom bracket cups and an axle on eBay, I bought a modern, sealed bearing, Chorus bottom bracket. I just want it to work.

I took a close look at my 28 year old De Rosa, which I had been avoiding for years, and saw the corrosion, rust and scratches that have taken their toll. The chrome on the the drop-outs and the fork crown were now rust. The stainless steel hardware on the brakes and derailleurs had rust. The chrome on the quick release skewers sprouted rust. The braze-on top tube cable guides were rusty.

I disassembled the entire bike and cleaned every part with a wire brush and solvent. I even replaced the bearings in the freewheel. I used Mobil 1 Synthetic Grease in all the ball bearings, because that’s what I had but he viscosity might be a little too high for the freewheel.

Campagnolo Record Brake Caliper Parts

I’m not interested in a restoration, so re-chroming wasn’t an option. I just want to do preservation, so I can ride my bike. I used Eastwood Rust Encapsulator on the large areas of rust. It’s not pretty but as on my Alfa Romeo, it has been effective in stopping rust from spreading. It’s also a little easier to use than POR-15. For the small parts, I’ve been using Boeshield T-9 for rust prevention. I don’t know yet how effectively Boeshield stops the rust (on the small steel parts) and the corrosion on the anodized aluminum – I live less than a mile from the Pacific Ocean.

Update July 7, 2019: I’ve recently switched to Pro Gold ProLink Chain Lube since I no longer live so close to the Pacific Ocean. Either way, I don’t use Boeshield or Pro Gold on my chain, only on the pivot points of brakes, derailleurs, etc.

Alfa Romeo Rust Repair

Alfetta Sprint Veloce in primer

The body shop called today to point out some rust they found when they removed the rear bumper (like I didn’t know about this). I guess what they really wanted to tell me was that it was going to cost more money.

I had ladled POR-15 Rust Preventive Paint on the sheet metal above the left bumper shock six years ago when I saw it looking not so good. I tried to put out of my mind the rust that I could see inside the bumper where the rubber had split.

Mo’ money, mo’ money, mo’ money…

So far the body shop has repaired rust in the front rocker panels, around the base of the windshield on the passenger side (without removing the glass), around the right windshield wiper drive shaft, on the door under the driver’s side window, around the rear bumper shock, below the bottom edge of the rear window and the trailing edge of the trunk lid.

Alfa Romeo Sprint Veloce less attractive higher angle

Over the years I had treated those areas with POR-15 and/or Eastwood Rust Encapsulator Paint and that seemed to slow the oxidation down almost completely.

I’d previously done my bush league repair work on the rust on the inner front fender wells and a large hole in the spare tire well – my first attempts at using fiberglass. Those repairs look great if you don’t look at them.