The current high lumen output LEDs use multiple chips on a single die. The Seoul Semiconductor Z-Power LED P7 and the Cree XLamp® MC-E LED are two examples that are in popular use by flashlight modders.
I recently bought a DealExtreme Cree MC-E LED 3-Mode Drop-in Module ($23.49 USD) for my Surefire 6P flashlight (the 6P body is bored to work with a single 18650 battery).
The DealExtreme P60 size drop-in works with 2.7V~4.2V – a single Li-Ion 18650 battery, single RCR123A battery or CR123A battery. There is also a not too low level mode and annoying strobe mode. In the Surefire 6P host (about 5.2″ long – 13.2 cm), the DealExtreme Cree MC-E drop-in is an extremely bright flashlight in a small package. There is an extensive list of similar sized flashlights that use P60 size drop-ins in this Candlepowerforums.com thread.
DealExtreme seems optimistic in their description of the MC-E drop-in brightness as 410 lumens. It has more flood and less of a hot spot than the Malkoff M30. For comparison, my Malkoff Devices M30 output is rated at a realistic 235 lumens. My SSC P7 mod, inspired by jirik_cz, gives me the feeling that I am seeing everything. If not for the $125 USD cost, I would be all over the Malkoff M60 MC-E.
In my flickr set below, there are beamshots comparing the Cree MC-E, Cree XR-E and SSC P7. I centered the beam of each light on the scrawny tree against the fence. This flickr slide show has larger versions of the images below and more clearly show the differences in the beams.
Gastropoda
leapingmonkeys
The Onion
Toolmonger
